Product

產品中心

服務熱線:

15589951055

聯係人:吳經理

公司地址:濟南市曆城區祝甸

電話:18615250275(王經理)

座機:0531-88988260

QQ:397332759/970020424

濟南標簽印刷鋁箔不幹膠印刷技術如何檢測

來源:http://www.jnurs.com   日期:2020-04-16

  凸版印刷的印刷機圓形平麵布局印刷鋁沒有幹膠,因為這種類型的印刷媒體在當下的接觸表麵是相對較小,壓力相對較大和隨機對稱,濟南這也沒有幹膠印刷廠完成油墨層的布局對稱傳輸。但由於濟南標簽印刷箔沒有幹膠印刷也艱難的努力,這樣,板底是平的,如何在產品印刷油墨顏色比較敏感,如果采用傳統的生產工藝,如膠合板作為板底部。

  There is absolutely no dry glue in the round plane layout of the letterpress printing aluminum foil, because the current contact surface of this type of printing media is relatively small, the pressure is relatively large and random symmetry, Jinan has absolutely no dry glue printing factory to complete the symmetrical transmission of the ink layer layout. However, due to the fact that Jinan label printing foil has absolutely no dry glue printing and hard work, so the plate bottom is flat, how to print ink color in products is more sensitive, if the traditional production process is adopted, such as plywood as the plate bottom.
济南标签印刷
  由於這種底撐牢度差,不耐壓,且平整度不佳,自由壓力不均勻,顏色不飽滿,並使油墨出現毛花等技術缺陷。印刷鋁箔從不幹膠帶產品,應選擇黃金版本屬性,如磁版板,鋁板基夾頭,黃金版的平麵度的屬性很好,抗壓強度高,印刷壓力也完全對稱,可以打印布局漆黑的豐滿,附著力強,受壞影響印刷的生產。
  Because of the poor fastness, non pressure resistance, poor flatness, uneven free pressure, color is not full, and the ink appears technical defects such as hairiness. Printing aluminum foil from adhesive tape products, should choose the gold version attribute, such as magnetic plate, aluminum plate base chuck, the flatness attribute of the gold plate is very good, the compression strength is high, the printing pressure is completely symmetrical, can print layout dark plump, strong adhesion, affected by bad printing production.
  因為獨特鋁箔膠粘紙很難,樹脂板材料是柔軟的,這麼多請求的凸版印刷過程鋼包內襯應采用不易拉伸和壓縮變形係數剛性材料,以避免由於壓力撞包襯,明確點邊緣線,版,筆跡變形導致毛刺等缺陷,使變粗。是,內包墊片材料宜采用硬卡紙,膠版紙和塊基礎,內包襯外層的細線滌綸也不容易拉伸或棉袋包墊片材料內部,更外層用棕色紙袋包裝具有良好的光澤度。
  Because the unique aluminum foil adhesive paper is very difficult, and the resin plate material is soft, so many of the requested relief printing process ladle lining should adopt the rigid material which is not easy to stretch and compress the deformation coefficient, so as to avoid the burr and other defects caused by the pressure hitting the ladle lining, defining the edge line, plate, handwriting deformation, and making it thicker. Yes, the hard cardboard, offset paper and block foundation should be used for the inner packing gasket material. The thin polyester fiber lining the outer layer is not easy to stretch or the cotton bag is used for the inner packing gasket material. The brown paper bag packaging for the outer layer has good glossiness.
  外包襯通過一切手段避免大麵積開挖,如果壓力跟蹤濟南從來沒有幹膠印刷廠需要在當地外包襯掏空或補貼,本文應該進洞或補貼與膠密封,以防止紙邊緣翹曲引起的印跡雙影,毛刺等質量缺陷。
  In order to avoid large-scale excavation of the outer lining, if there has never been a dry rubber printing factory in Jinan that needs to hollow out or subsidize the outer lining in the local area, this paper should enter a hole or subsidize the sealing with the rubber, so as to prevent the quality defects such as double shadow and burr caused by the warping of the paper edge.
  以上是濟南標簽印刷廠家為大家介紹的相關內容,想要了解更多內容,歡迎訪問網站:http://www.jnurs.com
  The above is the related content introduced by Jinan label printing factory. If you want to know more, please visit the website: http://www.jingyinshua.com


斗牛游戏在线玩